Metal profile fences: photo and video instruction for self-assembly

Due to a number of unique properties, light weight and ease of installation, profiled sheeting is widely used for the construction of garden houses, garages, sheds. Fences made of metal profiles are quite interesting: photo and video materials on installation give a complete picture of how to install a fence made of corrugated flooring with your own hands. Having studied the tips and recommendations of professionals, you can avoid mistakes when installing yourself and have reason to be proud of the installed structure.

Metal profile fences: photo and video instruction for self-assembly

Metal profile fences: photos, sizes and prices for material

The professional flooring is one of modern materials which with success apply to fences. It is characterized by versatility, high performance and can last up to 40 years. The metal profile is easy to maintain and the construction of it does not require seasonal repair. In addition, many craftsmen are happy to share tips on how to make a fence from corrugated board with their own hands. Video construction stages can be found on the Internet.

Metal profile fences: photo and video instruction for self-assembly

Before proceeding with the installation of a fence made of corrugated flooring with your own hands, it is necessary to become familiar with the classification of the material, its basic properties, methods of fastening and other nuances. Knowing the main dimensions of sheets of corrugated board for the fence, you can correctly design the structure, make an exact calculation of the required elements and minimize the excess material. This approach will ultimately have a positive impact on the cost of the whole structure.

Metal profile fences: photo and video instruction for self-assembly

Professional sheet marking is carried out according to the following indicators: metal thickness, wave height (ribs) and wave pitch. Given these characteristics, there are three groups of material:

  • brand C – used for the device walls, partitions and fences;
  • H brand – used in the construction of bearing elements, as well as for their strengthening;
  • NS grade is a universal material for roofing, finishing of floors and walls.

Metal profile fences: photo and video instruction for self-assembly

The profiled sheet is produced from rolled raw materials with a width of 0.98-1.85 m. What is the decking on the fences better? Give preference to the material that will provide the required structure of the fence stiffness and at the same time will not be too costly for the price. Excess sheet thickness will not damage the structure, but transportation and installation will be more difficult. The professional sheet most acceptable for the construction of fences has a thickness of 0.5-0.8 mm, and the height of the rib is from 8 to 20 mm.

Wooden fences: photo designs in a modern version. Types of wooden fences. Wooden fences: photos of beautiful structures. Wooden fence, fencing of the boards. Metal poles for fences.

When deciding on which one is better to choose a professional flooring for fences, take into account the wind load in your area and the requirements for sound insulation. If the territory adjoins the roadway, choose a material with a metal thickness of 0.8 mm. For example, the profiled sheet of the C20 brand will perfectly cope with the noise reduction.

Table 1. Sizes of some common professional flooring grades used for fences:

Profile mark The main parameters of sheets sheeting
Full sheet width, mm Sheet width
working mm
Sheet thickness
Wave height
Wave step
1 rm,
C8 1200 1150 0.4–0.8 eight 62.5 4.4–8.4
C10 1155 1100 0.4–0.8 ten 45 5.6–6.5
C20 1150 1100 0.45–0.7 20 137.5 4.3–7.4


Helpful advice! When purchasing a professional flooring with a color coating, do not forget to buy a can of identical paint for handling accidental scratches and damage during installation.

Despite the fact that the professional sheet has high strength, resistance to corrosion, temperature extremes, it is an affordable building material. Everyone can afford to buy decking for the fence. Prices per page for different manufacturers may vary, so you should carefully read the products and prices on the relevant sites.

The cost of sheeting depends on the thickness of the sheet, profile, type of coating and size. The price of the metal profile for the fence per sheet can be determined based on the cost of 1 m? material.

Table 2. The cost of corrugated flooring for fencing, where sheets are used with a length of 2 m with a polymeric protective coating:

Trade mark Price, rubles
unit of measurement Sheet thickness, mm
0.4 0.45 0.5 0.7 0.8
C8 m? 190 205 220 280 330
sheet 455 485 526 675 685
C10 m? 200 215 215 298
sheet 454 486 486 673
C21 m? 217 230 249 319 370
sheet 452 484 526 671 784


Table 3. The price of corrugated sheet with galvanized coating:

Trade mark Price, rubles
unit of measurement Sheet thickness, mm
0.4 0.45 0.5 0.7 0.8
C8 m? 152 163 171 217 247
sheet 363 390 410 520 592
C10 m? 160 172 180 230
sheet 364 390 409 520
C21 m? 174 187 195 248 282
sheet 364 389 408 520 592


Helpful advice! When purchasing decking, ask for data on the thickness of the sheet, as sellers are often silent about this, and this parameter is very important for the design of the fence.

To determine the cost of fences of corrugated board, you need to know the price of all the components of the structure: racks, horizontal guides, fixtures and other elements. For supporting posts metal pipes of square or circular cross section with wall thickness from 4 to 8 mm are used.

Table 4. Estimated prices of the pillars for the fence of corrugated board:

Metal pole for the collection of circular cross-section, mm Wall thickness mm Post length, m Cost, rub.
48 four 2 316
2.5 395
3 474
60 five 2 364
2.5 455
3 546
73 5.5 2 416
2.5 520
3 624
89 6.5 2 772
2.5 965
3 1158


A metal pole for the fence of 60×60 mm from a profile pipe 3 m long with a plug and welded plates for fastening will cost 600 rubles, the cost of a galvanized pole of the same length of a rectangular cross section of 62×55 mm will be 730 rubles. a piece. What pipes to use for the fence of corrugated? A pipe of 60×60 mm or 40×40 mm is usually used for racks, and 80×80 mm for gate supports and gates.

Turning to the manufacturers, order components and materials for self-assembly. Familiarize yourself with the recommendations on the design of the device, watching the video installation of the fence from the flooring with your own hands. You can apply for the installation of fences turnkey. The photo, the prices of fences from a professional flooring with installation are available in corresponding sections on websites of the companies. In the same place they will help you calculate the approximate cost of construction in online mode.

Metal profile fences: photo and video instruction for self-assembly

Numerous photos of professional flooring fences available on the net confirm with your own hands that these fences are aesthetically attractive, they can have different color and design solutions. Sufficiently low cost designs are made in the form of a continuous sheet of profiled sheet. Fences with brick pillars look solid, but they are more expensive in price.

So that at the most crucial moment you do not have to suspend work, prepare in advance a set of tools and equipment necessary for installation. To install the fence will require:

  • roulette, construction cord, stakes – all this is needed for marking;

Metal profile fences: photo and video instruction for self-assembly

  • building level – to check the vertical and horizontal position of the elements of the fence;
  • shovel – for the device of a ditch under the tape base if such it is provided by a design;
  • the drill – for drilling of openings under basic racks. You can use a hand drill or a gas drill for wells;
  • scissors for metal – will be needed in case of trimming of corrugated sheets;
  • welding machine – you will need to mount the horizontal rails to the support posts;
  • Bulgarian – for cutting profile pipes and stripping the joints of elements;
  • screwdriver – used to screw in the screws when sheeting the frame with sheets of steel.

Metal profile fences: photo and video instruction for self-assembly

From materials, in addition to profiled sheeting, pipes for supports and logs, it is necessary to prepare sand, crushed stone, and cement for concreting pillars. It will not be out of place to have a primer and paint for the treatment of metal surfaces.

We build fences from a professional flooring with our own hands: video materials, recommendations

How to make a fence out of corrugated? Begin work with preparation of a site under construction. The perimeter line is cleared of vegetation and debris. Then perform the markup. To do this, in the corners of the perimeter drive pins and between them stretch the building cord. Next, proceed to the choice of the distance between the columns of the fence of corrugated board, as a rule, the pitch between the supports 2-2.5 m, and sometimes 3 m.

Metal profile fences: photo and video instruction for self-assembly

At this stage, fix the location of the gate and entrance gates. What are the pillars needed for fences of corrugated? Traditionally for support columns use metal shaped tube of rectangular or square cross section. Its size is selected depending on the height of the fence and is 60×60 or 40×60 (mm). Some use round pipes, but horizontal guides are harder for them.

Helpful advice! Do not use metal pipes with wall thicknesses less than 2 mm for support posts. This will adversely affect the strength of the structure.

Installation of pillars for the fence of corrugated board produce in several ways. If you plan to fence from a solid profista under the support dug pits, the bottom of which is covered with roofing material. The depth of the pits is from 0.9 m to 1.2 m. A pillar is placed in the pit, the space around it is filled with rubble, well tamped, moistened and concreted.

Metal profile fences: photo and video instruction for self-assembly

If the future construction presupposes the presence of brick pillars, then it is necessary to arrange a strip footing for a corrugated fence with your own hands. For this purpose, a trench is dug out, 0.7 m deep and about 20 cm wide, a formwork with a height of 10-15 cm is installed, a framework is prepared from the bars of reinforcement. Next, install the frame in the trench, in the designated places set the pillars and pour concrete solution.

Before setting the mortar check the vertical installation of each column. In addition, it is necessary that the height of each support is the same. This can be achieved by making a mark on each rack corresponding to the ground level. You can check the installation with the help of building cord, stretched along the upper edge of the pillars.

Metal profile fences: photo and video instruction for self-assembly

Helpful advice! When concreting pillars for the fence of corrugated board, it is necessary to ensure that they are all in the same plane.

To set the solution stand for 4-5 days. Then it is necessary to weld the consoles (mortgages) to the metal uprights, to which the guides will subsequently be attached. Mortgage fixed at a distance of 20 cm from the top and bottom edges of the column. After that, you can enclose metal supports brick.

Metal profile fences: photo and video instruction for self-assembly

In case the fence will have structures with brick pillars without a base, there is no need to arrange a tape base. Here it is enough to apply a local base device for each brick pillar. The pit is dug to a depth of about 1 m with a size slightly larger than the side of a brick column.

Video of the construction of the fence with corrugated do-it-yourselfers will help to understand the intricacies of installation.

Metal profile fences: photo and video instruction for self-assembly

As soon as all the support posts are installed, it is possible to mount transverse lags. Profile pipes with a smaller cross-section are used as guides than columns-supports. Usually use pipes with a section of 20×40 mm or 20×20 mm. For fences with a height of up to 2.5 m, two rows are enough, 1.5 m apart.

How to make a fence of corrugated their own hands? After the skeleton of the structure is fully assembled, they start to trim it with a professional sheet. It is fixed by means of special screws, the cap of which is covered with a polymer composition of the corresponding color. Such hardware makes the mounting points almost imperceptible. It is recommended to make holes in the places of fastenings before covering.

Metal profile fences: photo and video instruction for self-assembly

Helpful advice! Screws must be fastened strictly perpendicularly in those places where the ribs are tightly adjacent to the frame elements.

Sheet corrugated overlapped, with the wave sheet with a smaller edge should be covered with a wave with a larger edge. It is customary to choose the distance between fastenings equal to two professional sheet waves.

Metal profile fences: photo and video instruction for self-assembly

Fencing of corrugated durable and durable. Due to the wide range of colors you can choose the material of any color and shape of the profile. It is perfectly combined with stone, brick, metal and can support the style of the buildings in the courtyard. Having studied the useful recommendations and video stories on the installation of corrugated fences, you can easily install independently modern, reliable and, most importantly, inexpensive fencing.

Like this post? Please share to your friends: