Choosing material for decoration of an apartment or a country house, you should pay attention to the decorative tiles under the stone or brick. It can be used for a homogeneous cladding of walls or combined with wallpaper. Despite the seeming simplicity, tile for brick for interior decoration has a number of installation features that must be considered when planning work with it.
Variants of decorative walls
Bare brick walls give the room a gloomy and uninhabitable look. However, today many people choose just such a design, because it differs by brevity, non-standard and makes it easy to select accessories.
To create the effect of bare walls you can use:
- wallpaper with a pattern of bricks;
- special panels;
- imitation brickwork on wet plaster;
- tile under brick;
Consider the advantages and disadvantages of each of the finishing material separately.
The most inexpensive and simple material in the installation of wallpaper. To create the effect of bare brick walls with their help, it will take a minimum amount of time. Such wallpapers are perfect for any style decision of the room.
If we talk about the benefits of this material, they are obvious:
- for their sticking does not require the presence of special experience of construction work;
- when carrying out finishing there is a minimum amount of garbage and dirt;
- calculation of the required amount of material can be done directly in the store;
- the period of finishing works is extremely small;
- there is no need to use special tools;
- large selection allows you to choose the best option at an affordable price.
Note! Textured non-woven wallpaper allows you to get the effect of this brickwork. However, a significant drawback of this material is the ability to accumulate dust and low resistance to water.
On the Internet there are a large number of photo wallpaper under the brick in combination with other materials.
Brick panels for interior walls are wear resistant and highly resistant to moisture. They are actively used for exterior and interior decorating.
Among the advantages are:
- small weight;
- long lasting excellent appearance;
- high sound insulation characteristics.
For the manufacture of panels using plastic, which is easily mounted on the wall with screws or screws. Due to the fact that each panel is mounted separately, in the event of damage, it is easy to replace a single piece.
Indoors, brick facing tiles began to be used relatively recently. Prior to that, she was a material for exterior decorating. At first, the cost of the tile was quite high, and it did not feature a large variety of design options. Gradually the color range was expanded and various textural solutions were proposed.
Among the advantages of tile bricks worth highlighting:
- ecological purity;
- ability to use with different materials (wood, plywood, metal, concrete, etc.);
- good sound insulation;
- high resistance to moisture.
Despite the large number of advantages, do not forget about a number of significant drawbacks. Among them – the need to attract specialists to work and the mandatory use of special materials. Not the last negative moment of laying tiles are dirt, the need for preparatory work and a large amount of construction waste.
However, the design solutions obtained through its use will please the eyes of the owners for a long time and give the room individuality.
Building material that is used for interior finishing work is not exposed to intense sunlight, temperature changes, high humidity, etc. However, this does not mean that approaching his choice is not attentive and frivolous. This is due not only to the quality of the tile, but also to the peculiarities of its installation, which are significantly different from the laying of ordinary tiles.
Before dwelling on a specific type, it is necessary to answer the question, what are you planning to get in the end: a complete imitation or a rather distant resemblance? The answer to this question will allow you to choose a suitable tile, which is made in the form of one brick or several rows.
The last option is simpler in styling, because it is large in size, and docking takes place on a chessboard principle. In this case, the brick wall will be different from the usual texture, but this will allow you to get an unusual effect and give the room a unique look.
Note! Choosing the type of tile in the form of panels, it is necessary to remember the increased fragility in places imitating seams.
It should be noted that the choice of the material from which it is made also has a significant impact on the strength of a decorative brick tile. For these purposes, clinker, ceramics, polymer cement or gypsum can be used. Each of the materials has its own characteristics, which must be taken into account when choosing tiles for finishing various rooms.
Each apartment owner independently makes a decision on the choice of one or another type of tile for wall decoration. At the same time it is necessary to take into account many points, among which are the operational characteristics (bathroom or living room). In addition, do not forget about the advantages and disadvantages of each material from which the tile is made.
This type of tile was originally used for exterior decorating, but lately it has been actively used indoors. This is due to the large number of advantages of this material:
- simplicity and ease of laying on the surface of any complexity;
- resistance to ultraviolet radiation, bacteria and friction;
- long service life due to high surface strength;
- water absorption;
- easy cleaning of dust and dirt.
Despite the advantages, the clinker tiles for interior decoration also have disadvantages:
- low impact resistance;
- high cost, which is especially taken into account when choosing between clinker and ordinary ceramic products.
There are several types of clinker tile on the construction market:
- technical, which is used for finishing sidewalks, transitions in public buildings, etc .;
- water resistant, used on hydraulic facilities;
- facing, for external internal works;
- Details for creating complex shapes.
Clinker tiles can have a matte or smooth surface, vary in color and inclusions. Depending on the end result, you can choose one or another texture.
This type of tile is best suited for decoration of living rooms or bedrooms. It is distinguished by a good sound and heat insulation. If there is a fireplace in the room, it is best to use gypsum tile for its decoration and surfaces next to it.
This material is easy to install, it fits well and does not require additional processing. However, gypsum tile is characterized by increased fragility, therefore, it must be purchased with a “stock”.
Upon completion of the installation work, do not forget about grouting. It is necessary to choose the color of the tile or a contrasting shade. Professionals recommend not using grout at all, and using the remaining cement mortar or tile adhesive. This is due to the fact that this brickwork is not overwritten.
Regardless of which room a tile is chosen for – in a kitchen, living room or bedroom, it looks beautiful and interesting in any interior. A wide range allows you to choose any version of the material and not to disturb the overall style decision of the home – red tile, white brick, black clinker, etc. Laying is also not a time consuming process, which allows even a beginner to do the work.