Keramoparket, or floor tiles under the tree, is the ideal solution when you need to save on material, but do not want to lose in the design of the room design. The material has undoubted advantages over natural wood. Due to the unique manufacturing technology, it turns out to create a natural imitation of wood species with improved strength and performance characteristics.
Distinctive advantages of tiles on the floor under the tree
Floor tiles under the tree have distinctive advantages that exalt this coating even in front of laminate flooring, parquet or solid wood. The main advantages of the material are:
- increased wear resistance;
- high strength;
- a high level of thermal conductivity and a thermal stability index make the material compatible with a floor heating system;
- has a high level of chemical inertness, which provides resistance to organic dyes and fats;
- high resistance to wear and abrasion;
- resistance to temperature fluctuations inside the room;
- the increased level of frost-resistance allows to apply a tile for finishing of arbors, verandahs, garden paths;
- high moisture resistance makes it possible to use a ceramopark for the bathroom and kitchen;
- the material does not require special care;
- affordable cost of the product;
- attractive and aesthetic appearance that accurately imitates the color and texture of different wood species;
- low cost of installation works.
The main disadvantage of floor tiles under the tree is its cold surface, which creates discomfort. However, this problem can be solved by using a floor heating system.
Depending on the composition of the material and method of manufacture, these types of floor tiles are distinguished: wood-ceramic granite, polyvinyl chloride and ceramic.
For its technical and operational indicators, porcelain stoneware for wood floors is slightly superior to ceramic products. For its manufacture uses high-grade white kaolin clay, quartz sand, rare earth metal oxides and coloring components. The front surface of the ceramic granite tile can be matte, rough or polished, which imitates not only the texture and color of any wood species, but also a radial or tangential cut.
The product has a high wear resistance, durability and frost resistance, which makes it possible to lay tile on the verandas, in the open gazebos and on the garden paths. Due to the fact that porcelain tiles can withstand significant loads and exposure to aggressive environment, it can be used to finish the floor in garages and production workshops.
The shape and size of the tiles on the floor of porcelain tiles can be different, which allows you to create different geometric patterns. Today, tiles of 50×50, 150×150, 150×300, 200×200, 300×300, 300×450, 300×600, 400×400, 450×450, 600×600, 600×900, 1200×150, 1200×300, 1200×400 mm are produced. The cost of porcelain stoneware products of domestic production averages 800-1200 rubles. per square meter, and 2500-3500 rubles. / m? from a foreign manufacturer.
Elastic tile on the floor of PVC is able to mimic laminate flooring and solid wood flooring. It is an affordable and easy-to-install material that comes in a variety of patterns and colors of wood textures. The material consists of three layers: the upper protective, the middle of vinyl and lower adhesive, protected by a film that is removed during its installation. Available in the form of rectangular panels, like laminate. PVC tiles can be square in size and imitate parquet.
PVC tiles on the floor is a moisture-resistant, wear-resistant and chemically resistant material that has good sound insulation properties and can be used when installing a floor heating system. The size of the product can be: 190.8×1300, 2408×1480, 493×493, 329×659, 393×393, 324×655, 500×500, 330×300, 610×610 mm. The average cost of the material is 800 rubles / m ?.
Ceramic tile wood is a natural material that is made by pressing and firing under certain conditions. The raw material used is clay with the addition of quartz sand, which reduces the percentage of shrinkage, slags, feldspar and nepheline to reduce the sintering temperature and thinners, which can improve the structure of the product.
Ceramic tile on the floor, the photo clearly displays this, can be glazed and unglazed. The product is produced in a wide range of colors and a wealth of design. These can be light wood colors, aged wood or variants of exotic species. Ceramic tile with wood pattern quite naturally imitates the natural texture of wood, its natural grain and color.
Ceramic tile wood is a durable, waterproof, durable and easy to maintain material that is suitable for decoration of any premises where it is able to create a natural interior. The material is used primarily for laying the floor. However, there are many design solutions that include laying ceramic tiles under a tree on the wall. This is especially true for rooms with high humidity, such as bathrooms, stylized as a sauna or bath.
The shape and size of floor tiles can be different, which resembles natural parquet or plank products, with which you can create any pattern that resembles the true tree structure. Ceramic tiles produced with the following dimensions: 593h593, 610h610, 302h302, 35h302, 193h120, 93h93, 225h900, 450h900, 2125h85, 150h1200, 150h900, 160h675, 50h1000, 502h54, 200h800, 200h400, 200×200 mm and 150h600.
The cost of domestic production of tiles averages 700-950 rubles / m ?. At the same time, the price of a product from a foreign manufacturer starts from 1100 rubles / m ?.
Wood floor tiles have certain characteristics that should be considered when choosing a material. Immediately you should pay attention to the marking, which indicates the purpose of the tile: wall or floor. The product can be glazed, which reduces its durability or without a glass decorative layer.
Helpful advice! As a flooring, it is better to purchase unglazed woodgrain tiles, which are more resistant to mechanical abrasion and have a high level of slip.
Wear resistance class is assigned to the material after a specific experiment. A circle with an abrasive coating begins to rotate along the surface of the product until the formation of signs of abrasion on the material. The number of revolutions determines the wear resistance class. PEI Class I includes products that have sustained up to 150 revolutions, PEI II – 600, and PEI III – 1500 and more.
Today, manufacturers are introducing new technologies that make it possible to obtain material with wear resistance class PEI IV, where visible damage does not appear on the tile even after 12,000 revolutions.
Slip resistance class is characterized by friction coefficient, which indicates the suitability of tile application for a particular room. Products with an indicator of R9 are designed for rooms in which they dress and walk without shoes. Tile marking R10 can be used for toilets, kitchens, public spaces, garages and warehouses. Keramoparket with R11- R13 will be used for industrial premises, where there is high humidity of the floor.
The next indicator is the class of chemical resistance, which is characterized by the level of material resistance to aggressive chemicals. Depending on the nature of the change in the external state of the product after exposure to an aggressive environment, the tile can fall into one of five levels:
- AA – on the product there is no visible damage;
- And – on a tile there are insignificant damages;
- B – medium changes are visible on the material;
- C – tile partially lost its former appearance;
- D – complete loss of original appearance.
Helpful advice! For the floor covering of the kitchen, it is recommended to purchase tile with the class of chemical resistance AA.
Material can often be found in kitchen design. Tiles under the laminate, the photo clearly displays this, perfectly combined with wooden furniture and decorative elements. For this room, you should choose a ceramoparket of PEI class III wear resistance of warm colors.
Helpful advice! For smaller rooms, it is better to choose a tile of light tones with fuzzy texture.
A good solution is laying tiles under a tree in the bathroom. The material has a high moisture resistance, which will create additional insulation for the room. Here, it is advisable to give preference to products of wear resistance class PEI II, which have a relief, rough texture with a matte shade, which also reduces the risk of slipping.
To create a volumetric effect, laying a floor tile under a “well” tree is considered an ideal option. In the middle of the general ornament is a square of dark color. Next it is surrounded by tiles of lighter shades, which symbolize the walls of the well.
Floor tiles under the tree is a good alternative to expensive and less practical wood. The material is more wear-resistant, tolerates moisture and corrosive environment well, is unpretentious in care, which prolongs its service life. A wide range of colors, a variety of textures and skillful installation of the material make it possible to create a floor covering that is hard to distinguish from natural wooden boards or natural parquet.