Due to the spaciousness and functionality with relatively small sizes, the wardrobe is gaining more and more popularity: the photo of the design of the facade of the structure clearly displays a variety of variations, as a result of which the product fits harmoniously into any interior style. Such a cabinet can be located in any, even the most inconvenient place. It is important to choose the appropriate option of internal filling, corresponding to the purpose of the room.
Varieties of modern wardrobes: photos of interesting options
There are various variations of wardrobes, which differ in shape, size and material of decoration. By type of construction products can be body or embedded. The first option is a stand-alone wardrobe, which consists of the rear and side walls, the top and bottom panels, and sliding doors. The design can move from place to place. Such a wardrobe is advisable to install in low spaces, because the design does not reach the ceiling.
Important! An autonomous coupe has certain dimensions and a clear geometric shape, so it will be hard to fit into an unformatted corner or position along an uneven wall.
The sliding wardrobe, built into the niche, is represented by a fixed module, which occupies the entire space of this recess. This model has no back and top panel. If the cabinet occupies all the free space along one of the walls, it may not have side elements. This is a solid, custom made design. Built-in cabinet is assembled from the ready-made elements with their own hands. The main advantage of this model is the possibility of its installation in any place, since the elements of the product are adapted to the existing space.
The design can be straight, angular or diagonal-angular. The first option is represented by a rectangular product. This form is used for frame double-door wardrobes. The corner model allows the maximum use of the angle, which is especially important for small rooms. This form is most often used for square hallways and rectangular children’s rooms. Despite the small size of the product, the built-in corner wardrobe is very roomy from the inside. However, in order for the design to be convenient in operation, it is important to select the internal arrangement.
Diagonal corner cabinet has a slightly convex facade. This design is characterized by maximum capacity and has an attractive appearance. However, the product has a high cost compared to other models. This is caused by the complex shape of the facade.
Sliding wardrobes 2-3 m long are the most demanded. Such designs are suitable for hallways, bedrooms and living rooms. The internal content can be organized in various ways, which will divide the space into several parts, independent of each other.
The popular size of the wardrobe in the hall is 1800x2400x600 mm. This design is convenient to divide into two compartments. In the first (600 mm long) there will be stationary shelves and drawers, in the second it is necessary to install a bar.
Cabinets may have different depths. For hallways, the most suitable option is the design depth of 400 mm. Due to the non-standard value of this parameter, the rod is set here perpendicular to the door. Another unconventional size is a depth of 500 mm. Such products are made mainly to order. Built-in cabinets or hull structures of such depth are equipped with non-standard fittings, which has a higher cost.
The most optimal is the cabinet depth of 600 mm. For this model, you can easily pick up all the necessary accessories and sliding mechanisms.
The built-in sliding wardrobe to order by the individual sizes is made. There are several variations of design. The most common is the wall-to-wall cabinet. This model allows you to create a complete wardrobe in the room. This is the most economical solution, since the product consists of sliding doors that are attached directly to the floor, ceiling and walls, and the elements of the internal filling.
The built-in wardrobe can be made into the living room with open shelves, which are recommended for installation of a TV, a music center, placement of books, photos and other accessories.
The design from panel to panel has side walls. This is a good option for a room with two exits, which are located on the same plane. If the entrance door is located in the middle of the wall, the most appropriate option, allowing rational use of free space, is a model with a mezzanine over the opening. The wardrobe frames the door around the perimeter, making it a highlight of the interior.
The design with one side surface is represented by the model from the wall to the panel. This option is advisable to arrange in a room with a corner door. Two-door closet with a mezzanine is convenient in the case of high ceilings in the apartment, when it is impractical to install too high doors. Antresol can be used to store items that are rarely used.
To organize a storage system under the stairs or in the attic, you should use the built-in closet under the sloping ceiling. This design will eliminate the broken corners and make rational use of the constrained space. However, the manufacture of such a cabinet is a complex, time-consuming process that requires precise calculations for each part.
The sliding door mechanism consists of the following elements:
- the upper and lower frames, which are attached to the side panels, hiding behind the guides, and ensure reliable fixation of the rollers in the same plane;
- two guide rollers;
- asymmetrical profile, which is located on the side of the door, replacing the upper handles and accessories.
Guides are used not only to support roller carriages. The upper plank, having U-shaped grooves, where the upper edge of the flap is inserted, excludes door swing when moving them. The upper rail load is predominantly absent. The bottom guide with a rounded relief, which perceives the main load from the door, is designed to move the valves. The rollers located in the lower and upper parts of the structure serve to hold the sash in a vertical position. The carriage almost does not receive the load. The lower rollers are supplied with bearings that ensure the system reliability and good mobility. These are very durable products, the size of which is larger than that of the upper elements. The design includes the antennae of the stopper.
- with side profile;
The sliding wardrobe is a stylish, convenient and functional storage for a huge amount of things. Due to the spacious design, relatively small dimensions, the original facade, the product is an indispensable element of the room, allowing not only to streamline things, but also to become a highlight of the interior.