Wardrobe in the hallway – photos clearly demonstrate the variety of products – is one of the most necessary elements of furniture in the room. Its design and dimensions are selected taking into account the peculiarities of the corridor. Internal filling should be well thought out so that it is possible to use each centimeter of space efficiently. Due to the variety of design of the facade, the product can be harmoniously entered into any interior of the room.
What can be a closet in the hallway: photo options
At registration of space of the corridor a special approach is required. Typically, the room is not large and has the features of the structure, which appear in the presence of niches, exterior corners and interior doors, which complicates the process of furnishing the corridor. In this confined space it is necessary to be able to balance the functionality and aesthetics.
In the hallway, you can install a wardrobe, a product with hinged doors and a combined design. The first option is the most popular and sought-after solution. Such design will fit even into a narrow and cramped space thanks to ergonomic sliding doors. Due to the variety of design of the facade of the cabinets for the hallway – the photos clearly demonstrate this – the corridor will acquire a well-groomed, stylish and presentable appearance. Outerwear, seasonal shoes, hats and other accessories will be hidden behind the sliding structure from prying eyes.
The reliability and durability of the doors depends on the material of the frame, where the movement of cloths. Aluminum products are considered higher quality. They provide the silent course of cloths, are not deformed and long serve. Steel guides have a lower cost. Their term of service does not exceed 5-8 years.
Important! The compartment system takes up to 10 cm of internal space, so the shelves will have a smaller width than the design itself.
Cabinets with hinged doors, resembling canisters, need a large space needed to open the structure. Internal content is no different from the previous version. This model is most often installed in a spacious hallway, photos of cabinets display the possible design options. Closed product is usually made from natural wood. The facade is decorated with decorative carvings and forged fittings, which creates a respectable appearance of the product, emphasizing the subtle taste of the apartment owner.
It is very often possible to find an open-type wardrobe built into a niche in the hallway, which is devoid of opening doors. This option looks minimalistic, but it is the most convenient to use, as it allows you to quickly take off your clothes or take the necessary accessory from a shelf or drawer. However, since the entire contents of the structure is in sight, things in the closet must be carefully completed so that the situation in the room does not resemble chaos.
Combined models are a combination of closed and open cabinets. Here can be located a small cabinet case. The open part is represented by shelves and hooks, and in its lower space you can equip a comfortable small ottoman. It is used not only for sitting – in its cavity you can equip a space for storing various things.
The best option for the hallway is a wardrobe with a sliding door system. Due to the fact that the product can be shallow (only 45 cm), a lot of space is not required to install the structure. This is enough to arrange outdoor clothing, shoes and casual accessories. Sliding doors can save space without the need for free space to open them.
There are two design options: a stand-alone product and a built-in wardrobe. The first type is a complete model consisting of a frame, elements of internal filling and sliding doors. The design can move from place to place. This cabinet is usually used for rooms with a large area, where it is not necessary to save space. The disadvantages of the product are its high cost, which is associated with high material costs, and a relatively small usable area (due to the presence of the frame). Moreover, in the upper part of the structure, due to the formation of a gap between the product and the ceiling, dust accumulates.
Built-in models can often be found in modern hallways. This design is carried out in the hall to order. The built-in closet can be installed in any cramped space. Such a product does not have its own walls, ceiling and floor, as they are replaced by elements of the room, to which the filling and cabinet doors are attached. This allows you to significantly save on materials, so this design will cost inexpensive. Photos of built-in wardrobes and prices for products can be seen in catalogs from well-known manufacturers.
Such a cabinet is as spacious as possible and allows you to fully utilize the space allotted for it. The product design can be created taking into account the peculiarities of the corridor layout. It occupies the entire area from floor to ceiling, which eliminates the accumulation of dust on a horizontal surface. The main drawback of the built-in furniture is its stationarity.
The design of the built-in closet fully repeats the layout of its installation. The product can be mounted in a niche, in a corner or occupy the space between two walls. For small corridors the most rational option is the angular design. In this case, it is possible to use the dead small zone of the room as efficiently as possible by organizing a compact storage system there. Such a construction will make it possible to free up space along the walls, as a result of which the room will appear more spacious and comfortable.
The corner wardrobe built into the hallway consists of internal filling elements and sliding doors. A variation of the corner model is a trapezoid-shaped structure, which is additionally equipped with side faces. Such a cabinet is more capacious than a simple triangular analog. External side walls of the structure can be equipped with open shelves to accommodate various small items.
The rectangular module is also very popular due to its low cost and original facade design, which can be made in any stylistic direction. The design fills the floor space along one of the walls. May have a different depth, which depends on the availability of free space.
The most difficult to perform and expensive are radial wardrobes, in which the movement of doors is carried out along the radius of a circle. The facade of such structures is made of expensive materials according to a special technology, which significantly increases the price of the closet built into the hallway. However, this is offset by a spectacular, stylish, original and unique appearance. This model is able to fit into any layout, which is associated with ergonomic door opening. The disadvantage of the cabinet is the inability to use mirrors and chipboard in the manufacture of doors.
Helpful advice! The radial coupe has no direct and acute angles, due to which it is considered less traumatic and is suitable for homes with children.
As mentioned earlier, the closet in the hallway can be located in a corner, in a niche or along one of the walls. The size of the structure depends on it. In the hallway recessed corner cabinets and rectangular products may have different dimensions. If the cabinet is mounted in a niche, then in this case there are certain limitations that depend on its depth, height and width. The last parameter determines the number of doors. Two-door cabinets are suitable for niches with a width of 1.5-2 m, three-door cabinets – 2-3 m, four-door cabinets – 2.5-4 m. Too narrow doors will fall out of the lower grooves, and wide ones will deform with time.
Important! The width of the compartment doors should not exceed 0.5-1 m.
It is necessary that the height of the niche is completely closed by the doors, but the frame cannot exceed 2.7-2.8 m. A higher structure will be deprived of the necessary stability and rigidity. If the room has high ceilings, which are also characteristic of a niche, the doors should be made of separate segments, and you can use different materials. Variants of effective and unique design of the facade are shown in the photo of the built-in wardrobes in the hallway.
The final and most crucial step is the installation of sliding doors. Installation begins with mounting transverse profiles that are stuffed with a rubber hammer. Further, horizontal screws are mounted by means of screws. The top element is used to fix the doors relative to their depth, the bottom one provides opening and closing.
Choosing a closet in the hallway is a very important event. The design should become not only a convenient storage system, but also a stylish element of the corridor.