From this article, you can find out what features the paint for the bathroom has: the classification and overview of the main types of compositions intended for rooms with a high level of humidity, their advantages and disadvantages. The text contains recommendations that will help determine the choice of finishing materials with optimal performance.
How to paint the walls in the bathroom: choose the finishing material
Bathroom renovation is an expensive and complicated process that requires careful selection of materials. The room must be clean and resistant to moisture. The presence of mold is unacceptable, therefore special requirements are put forward for the finishing of walls. The most budget coating is a dye. This material is not only economical and easy to apply. Coloring compositions make it possible to achieve unique interior solutions due to saturated and rich colors, which are obtained by adding pigments to the mixture.
Note! The dye does not apply to those areas that come into contact with water, for example, the areas around the sink and bathtub. It is desirable to finish these places with ceramic tiles or cover them with glass panels.
In order to decide how to paint the walls in the bathroom, it is advisable to get acquainted with the existing range of compositions, weigh all the disadvantages and advantages of each type, and also determine which of the options is suitable for creating the necessary artistic effect.
The following types of wall paints are used as finishing materials:
- water emulsion;
- chlorinated rubber;
The most important properties of dyes, which are used to decorate the walls in the bathroom, are water resistance and protection from microorganisms, such as fungi and mold.
Aqueous emulsion compositions are widely used for wall decoration. These dyes have a number of advantages:
- relatively low price;
- no unpleasant smell;
- simple application process;
- environmental friendliness and safety;
- the coating dries quickly;
- under the influence of sunlight the surface retains color well.
In the photo, painting the walls with decorative water-based compositions looks very attractive. Thanks to the optimal viscosity, a beautiful effect is obtained, so designers have ample opportunity to choose a coating for the walls. Using various tools, you can apply on the surface of the original drawings. Waterborne paints have an extensive color palette. By adding special pigments to the composition, you can get any shade that perfectly fits into the bathroom interior design.
Water-based dyes are used to create matte and glossy surfaces. When choosing a material, it is very important to consider the type of base, its structure, as well as to use a suitable priming composition. The advantage of these dyes is that any contamination can be easily removed from the surface by wiping the wall with a damp cloth or sponge soaked in soapy water. After that, this area is re-painted.
Important! It is not recommended to use water-based dyes in areas in contact with water. If this can not be avoided, you should choose a coating with a glossy surface. They are more resistant to mechanical damage.
There are no antifungal additives in the composition of latex dyes, therefore, before painting the walls in the bathroom, they must be treated with a special primer composition with antiseptic properties.
The advantages of latex-based dyes:
- elastic surface that masks minor defects of the walls: cracks, chips;
- durable coating;
- resistance to mechanical stress;
- excellent decorative properties;
- no unpleasant odors;
- the dye creates a thin film on the surface that protects the walls from contamination;
- maximum drying time is 2 hours.
Latex surface does not tolerate low temperatures very well. As a result of their influence, the coating cracks. Latex dyes also react negatively to exposure to sunlight, which causes the surface to fade and lose brightness. The price of these compounds is much higher than water-based, so finishing the work in the bathroom will cost more.
Experts believe acrylic compositions the best option for painting the walls in the bathroom. This type of dye refers to the finishing materials on a water-dispersed basis.
Why it is profitable to buy acrylic paint for the bathroom:
- a large palette of colors and shades;
- resistance to pollution;
- simple application process;
- the presence of a light, but not sharp smell, which does not cause discomfort during the painting of the walls;
- dirt is easily removed from the surface;
- wiping the walls with a damp cloth and soapy water does not damage the coating;
- The dye includes antifungal additives that prevent the development of mold;
- The compositions are positioned as waterproof paints for the bathroom, so they can be used to finish areas that are constantly in contact with moisture;
- preparation of walls is not required before painting;
- due to the optimal viscosity, the dye conceals small errors on the surface.
Helpful advice! Choosing a dye, it is desirable to focus on the products of leading manufacturers. They are quite expensive, but they can create a high-quality and durable coating on the walls.
Thinking over what paint to paint the walls in the bathroom, you should pay attention to the compositions having a silicone and silicate base. This category of finishing materials enjoys wide popularity in the market due to its unique physical properties.
Advantages of silicone dyes:
- the coating does not pass water at all;
- high resistance to pollution;
- the composition forms a coating with vapor-proof properties on the surface of the walls;
- The dye is able to block significant errors in the walls, for example, potholes and deep cracks.
Silicone compounds are classified as waterproof paints for the bathroom. Water emulsion options are better than others, suitable for rooms with high humidity levels, but their cost is very high, which is the main drawback.
It is not recommended to use PVA-based silicone water-based dye for wall decoration in the bathroom. This composition is intended for rooms with a dry microclimate. It can only be used as a ceiling for a bathroom.
The most reliable and practical coating option is chlorinated rubber paint. This composition can be an excellent substitute for mosaic or ceramic tile. This type of coverage does not need frequent updating and over the long term retains an attractive appearance.
These compounds perfectly fall on the surface of the tile, completely blocking it. To ensure the necessary level of adhesion it is necessary to polish the smooth and shiny surface of the tile. It is not recommended to dilute the dye in order to save. Qualitative result is possible only if the consistency of the composition is dense. You can also find special dyes for ceramic and glass surfaces.
With painting the walls in the bathroom can handle any. The main thing is to use a high-quality dye that meets the requirements of rooms with high humidity levels, as well as to strictly follow the technology. During operation, be sure to take into account the recommendations of the manufacturer. Only in this case, the coating will be strong and durable.