In order not to be mistaken when connecting the washing machine, you must first familiarize yourself with the installation instructions. Manufacturers usually indicate various subtleties that are specific to a particular model. After reviewing the manual for installation and operation, following the basic rules, you can connect the washing machine to the water supply and sewage without any help.
Choosing a place to install
Proper installation and configuration of the washing machine – a guarantee of long and uninterrupted operation of the equipment. Quite seriously, you should also take into consideration the choice of a place for a washing machine. The machine is usually installed in the vicinity of communications. Nearby should be a sewer drain and plumbing. Therefore, the best places for such equipment are usually considered:
- bathroom;
- kitchen;
- restroom.
Bath is a standard. Most of the consumers are trying to install such household appliances there, often placing the machine under the surface-mounted water-lily sink. But small areas of rooms in old buildings often do not allow to place rather dimensional automata, therefore for this purpose they use both kitchen premises and lavatories. There are other options for accommodation. In the absence of the required space, the washing complex is installed even in the hallways, leading communication lines there.
Well, the long-awaited machine has been bought, the packaging has been removed, now we need to remove special shipping parts. You also need to remove the additional fasteners that secure the drum typewriter. All the resulting holes after removing the bolts are closed with the plugs supplied in the kit. After such events, you can proceed directly to the connection.
Important! It is strictly forbidden to turn on the machine before removing the transport fasteners. This may damage the drum and damage all equipment.
There are several features of connecting washing machines to the water supply and sewage. They may depend on the type of similar household appliances:
- If the washing machine does not have a check valve that only allows water to pass in one direction, then the level of the outlet hose is indicated in the instruction manual. Usually the nozzle should not be located above 50 cm.
- To connect the machine will need to purchase an additional sewer siphon. Then the outlet hose is connected to the sink drain system above the knee. This connection option eliminates the possibility of leakage.
- Similarly, the connection is made, if necessary, to the system of water drainage from the bathroom. Where it is more convenient to do this depends on the location of the washing machine, and the place of communication.
- The easiest way to arrange the drain into the sewer is considered to be fixing the drain pipe on the edge of the sink or bathroom. But such a connection is absolutely not reliable.
- For any type of discharge arrangement, the discharge hose is mounted on the back wall, at a height of about 80 cm and must run without kinks and twists.
Drain water can be carried out directly into the sewer. If its thickness is 5 cm or more, then a tap can be installed directly on it. For a better connection using a rubber seal. But this method can be used as a temporary measure, since the waste water under certain conditions can flow back and an unpleasant smell will appear in the machine.
Important! When connecting the washing machine to the water supply and sewage system, it is necessary to pay attention to the strength of the pipe fastening. In the absence of reliable fixation, all connections can lose tightness, leading to leakage.
The connection of the machine to the water is carried out with the help of special hoses having a diameter of about 1.9 cm. Such a hose is connected at one end to washing equipment and the other to a plumbing system. At the place of connection there must be a shut-off valve so that at any time there is an opportunity to shut off the flow of water. Depending on the material from which the pipe is made, in which place the connection is planned, the frame is produced in different ways.
To connect the washing machine in the water pipe must first be embedded valve. If the communication is made of metal elements, for this purpose use a special crimp sleeve. This part, consisting of two parts, put on the pipeline and firmly tighten the bolts. The required hole is drilled straight through the coupling, and a tap is screwed onto the threaded outlet.
How to install a pump to increase the water pressure in the apartment. Classification of pumps to increase the pressure in the water supply of the apartment, their choice and features of self-installation.
If cold water is supplied to the premises using metal-plastic pipes, then a special tee is required to connect the washing machine. In another way it is also called a fitting. In the right place a piece of pipe is cut out, a tee is inserted into the opening and carefully sealed with rubber gaskets. Then connect the crane.
If you need a temporary connection of household appliances to the water, you can connect it to the mixer. For these purposes, also used tee. Similarly, you can connect together leading the water to the drain tank.
There are cases when there is no running water in the room, but I don’t really want to give up the automatic machine. For example, on the summer cottage, where from communications only a well or a regular water rocking chair. In such a situation, it is also possible to ensure the operation of machinery. This will require a hose and a large water tank, which must be installed above the washing equipment. With this arrangement of water will create the necessary pressure required for the operation of the built-in pump.
You can also purchase a pumping station, which will supply water if necessary. But this method will require quite serious additional costs.
Without electricity, no equipment will work, no exception, and assistants for washing. For the operation of the machine will require a three-wire outlet and a wire for grounding. If you need to use an extension cord, you should choose only those with grounding elements. The best solution for connecting the machine is considered to be a socket connected to a separate electrical circuit breaker.
Important! It is strictly forbidden to equip grounding on water, gas and other pipes, as well as radiators. Such a connection can be deadly!
After connecting the washing machine to the water supply and sewage, it is necessary to check its operation. First of all, review all available connections, then carry out a test run. Correct installation guarantees 100% fulfillment of the following points:
- the internal tank is quickly filled to the required level;
- there are no leakages at the points of connection with the water supply system and the drain;
- after the termination of a set of water approximately after 5 minutes, its heating begins;
- the rotation of the drum must be uniform;
- no extraneous noise during operation;
- water drains quickly, without delay.
It is worth testing equipment operation in all possible modes. This will allow in the early stages to eliminate problems that arise and to avoid serious damage in the future. If, however, malfunctions in work are still outlined: there were leaks or timely discharge did not occur, then you will have to start all over again. The machine must be disconnected from the network, drain the water and re-double-check the correctness and thoroughness of the connection of all joints and tie-in points.
As you can see, connecting the washing machine to the water supply and sewage is not difficult. All used connecting elements are quite available in any sanitary ware shop and do not require large expenses. Observing all the listed rules and subtleties, as well as carefully studying the enclosed instructions, you can without any problems and call professionals do such work yourself.
