Plastic entrance doors for a private house, the photos of which can now be more and more often found, have been used in their present purpose relatively recently. In those days, when they only appeared on sale, they were installed mainly in various stores, office buildings and public buildings. Then these doors began to be used as a balcony, and made them using the same technology as plastic windows.
What are the undoubted advantages and obvious disadvantages of plastic entrance structures
Today, metal-plastic entrance systems quite successfully occupy well-deserved positions in private residential construction as input, as well as interior design. And this is carried out thanks to the indisputable advantages that the entrance plastic doors are not deprived of. Photos of such systems suggest that this is quite an adequate solution.
Modern doors made of metal have a large stock of positive qualities:
- unusually high plastic strength;
- fairly low flammability;
- door material is not exposed to any acids, alkaline compounds, as well as lime;
- plastic door designs are completely unpretentious in periodic maintenance, even with fairly long-term operation;
- full environmental and health safety;
- presentable appearance, remaining unchanged even after exposure to high and low temperatures;
- incomparable noise protection and excellent thermal insulation;
- high resistance to various rough mechanical effects;
- many different design opportunities;
- quite affordable even in the budget cluster cost of products.
Most often, the plastic door owners use as input to a private house. In addition, they can be installed at the entrance to the home boiler room or garage.
Helpful advice! PVC entrance door can be applied at the entrance to the bath. Of course, not in the steam room itself, but in the rest room. Due to its excellent heat protection, it will be nice to keep warm.
For the manufacture of modern plastic inlet system, metal-plastic profiles are used, which have five separate air chambers and stiffeners. Profiles are either purely plastic or using metal fittings. All parts of the door frame to increase strength are connected with the help of special metal embedded with each other. Absolutely any shape is such a frame of modern plastic entrance door for a private house. Photos of rectangular, arched, trapezoid, round and other various doors can be easily found.
Special plastic bolts and power hinges, secure locks and door closers are installed on the input plastic structures. A multi-locking mechanism around the perimeter ensures a tight and reliable fit of the door on all its sides.
Slopes on various plastic windows do it yourself: video and installation instructions. Comparative characteristics of various options for finishing window blocks, installation of drywall.
Any plastic door consists of the following structural elements:
- door frame – an element that is in essence a frame from a profile. It is usually reinforced with a steel frame, the corners of which are connected by special internal parts. They provide increased rigidity;
- actually, the door leaf, which is a profile frame, closed on both sides with galvanized steel sheets. Between them there is a heat insulating material, which also plays the role of sound insulation. Partially, the door can be made of triplex or armored glass;
- fittings – most of all used latch locks, which provide good reliability of closing from almost all sides of the door leaf;
- the threshold, which can be of several types: which is the structural part of the frame, made of steel or aluminum. In addition, it is warmed or not.
The door leaf is often further strengthened by inserts made of steel, which are designed to block free access to locks and folds.
Helpful advice! Installing massive doors with enhanced protection is meaningful. You need to know that such doors sometimes have a weight of more than 100 kg, so the design of the walls themselves, where the block is inserted, should provide for this.
The surface of the entrance plastic door for a private house (the photo illustrates this perfectly) can be of two different types: deaf and transparent. As already mentioned, deaf filling can be carried out using thick steel sheets, and more often, sandwich panels are used for this purpose. They are made of three-layer: a heater of expanded polystyrene is laid between two plastic or steel sheets.
Transparent glass door filling is usually combined. This means that the upper part of it is equipped with a double-glazed window, similar to the window, and the lower part is made deaf. However, sometimes there are options purely plastic or glass. As for the glass itself, it can be not only transparent, but also matte, grooved, colored, and sometimes even stained glass. Not necessarily the door is white. Today, there are more often laminated canvases for wood or other texture. The color can also be completely different.
By design, the doors can be ordinary single-leaf, double-leaf or fitted with a transom. Double-leaf doors sometimes make stulpovym. This design provides for fixing one half of the door, often smaller in size. Metal doors are not only swing, but also sliding. There are usually only two types of locks on plastic door constructions: under the handle-arc and under the pressure handle. It is safer to purchase a door with a lock of the first type. Sometimes doors are equipped with closers.
Plastic doors perfectly provide quite reliable heat and sound insulation. At the same time, they are undoubtedly inferior in terms of security to quality metal doors. As for aesthetics and design, plastic constructions are not bad combined with brick, stone or concrete walls. They will also look on the siding facades.
Helpful advice! For wooden walls, the choice should be taken more carefully. Only a door imitating wood will be relevant here. It is also necessary that it is well combined with the facade in color and texture.
The undoubted advantage of entrance plastic doors for a private house (photo to that in confirmation) is the ability to create curvilinear structures. This allows the use of arched doors in combination with similar windows. Sometimes the arched door can give the appropriate transom. Its configuration can be very different, and glazing with stained glass will add extra uniqueness and uniqueness.
Nowadays, plastic rapidly and not without success has penetrated into all spheres of human activity. Today it is no longer possible to imagine the construction industry without the use of plastic products. Do not become an exception and entrance doors. Thanks to the achievements of the construction industry, we can use them in country houses without special concerns. One thing to remember is that when buying a plastic door, great importance is given to its quality and reputation of the manufacturer. After all, your safety depends on it.
