Ceilings for the bedroom of plasterboard: photo and installation process

Modern interior decoration is unthinkable without the use of drywall sheets. This material is popular not by chance. Due to softness and plasticity, sheets can be cut with a jigsaw, bend and sheathe almost any surface with them. Very often, this material sheathed ceiling suspended structures, which can be simple or multi-level. For example, it is possible to construct ceilings for a bedroom from gypsum cardboard: it is easy to find a photo and a description of the installation process.

Ceilings for the bedroom of plasterboard: photo and installation process

What are the ceilings for the bedroom drywall: photos and design options

The best way to level the ceiling is to install a suspended ceiling system. There are many types of finishing materials for facing this construction, but we will consider the cheapest and most common of them – gypsum plasterboard. The bedroom is a room in which the ceiling should have not only practical but also beautiful design. Ceilings for the bedroom of plasterboard, photos of design options that are striking in their diversity, are divided into several types:

  • suspended single-level ceiling, with the installation of profiles on the U-shaped attachment directly to the floor slabs. Most often mounted in residential premises;

Ceilings for the bedroom of plasterboard: photo and installation process

  • single-level suspended ceiling, mounted on hangers attached to floor slabs. Mount this type in industrial and commercial premises with high ceilings;

Ceilings for the bedroom of plasterboard: photo and installation process

  • multi-level structures with a combined type of fastening frame. The lower level can be made in straight lines or be curved in any shape.

Ceilings for the bedroom of plasterboard: photo and installation process

Helpful advice! With a small height of the walls should not choose a multi-level type of construction. The construction of such a ceiling will greatly reduce the height of the room, which will make it uncomfortable. Beautiful ceiling can be created in the same level.

In order to make your own suspended ceiling in your bedroom, you need to stock up on the necessary tools and materials. For this you will need:

  • gypsum plasterboard. Its standard length and width of 120×250 cm, and the thickness is from 0.6 to 0.8 cm. This is exactly the ceiling gypsum board. Unlike the wall, it is thinner and lighter. The required number of sheets calculated by the area of ​​the room, rounded in a big way. When installing multi-level ceilings calculation is more complicated. In this case, you need to take into account the area of ​​the side surfaces;

Ceilings for the bedroom of plasterboard: photo and installation process

  • CD profile and UD. It is made of soft metal. With it, construct the skeleton of the entire design of the ceiling. Profile is 350 – 400 cm in length;
  • P – shaped mounts. In common language they are called peshkami. They are made of the same metal as the profiles themselves;
  • screws, screws, dowels;
  • putty;
  • fixtures and wiring to them;
  • water level, having a length greater than the diagonal of the room;
  • chocline – a special thread with blue, which beat off a horizontal line on the level;

Ceilings for the bedroom of plasterboard: photo and installation process

  • perforator and screwdriver;
  • construction knife;
  • cutter for cutting holes for lamps;
  • roulette, level, spatula.

Suspended plasterboard ceilings: photo, design of different rooms. Features of the device ceilings from drywall in various rooms. Types of ceilings.

These tools and materials are enough to build a ceiling for a bedroom made of plasterboard. A photo The various stages of installation also do not hurt to add to this list.

Helpful advice! When screwing screws into the drywall, use a special nozzle that has a stop. This will prevent paper tearing.

Ceilings for the bedroom of plasterboard: photo and installation process

Before starting the main works, it is necessary to prepare the walls and the base of the ceiling. To do this, we punch pieces of plaster from the ceiling with a perforator that do not adhere well. If there is a rounding between the walls and the ceiling, then the yoke is also removed. It is necessary to ensure that in the places of attachment of the profile the walls are even.

Ceilings for the bedroom of plasterboard: photo and installation process

In order to make the correct markup, you need to use the water level. To do this, look for the angle at which the ceiling is in the lowest place. The mark is placed so that the bottom of the frame is not less than 25 mm from the ceiling. From this tag and begin to work level. You need to do it together. One person holds the water level in the first mark, and the second puts marks in each of the remaining corners.

Ceilings for the bedroom of plasterboard: photo and installation process

When the level is found in all the corners, the points are connected by straight lines using a choline. For mounting on the wall is designed profile UD. It is screwed around the perimeter of the bedroom so that its lower edge coincides with the lines of the level. When all profiles are screwed, you need to find the most right angle in the room. It is from him will be mounted drywall.

Ceilings for the bedroom of plasterboard: photo and installation process

From the right angle every 50 cm. It is necessary to mark on the ceiling the place where the ceiling profile CD will be. We do the same with the opposite wall. Symmetric points on the walls are connected by parallel segments, which can be beaten off by the choleline. U-shaped fasteners are screwed over these segments after 50 cm. CD profiles are inserted into the UD wall profiles with edges and passed inside the cushions. Then the middle of each profile is raised by 2 – 3 cm above and bend the nearest U-shaped mount.

Ceilings for the bedroom of plasterboard: photo and installation process

Across the CD profiles, tightly tighten the thread between the UD profiles. It will serve as a level. Then, one by one, the ceiling profiles are set one by one and fixed with screws in the peski. When all the pads are screwed to the profiles, the frame can begin to be sheathed with plasterboard, but first you need to lead the wires to the places where the lamps will be.

Ceilings for the bedroom of plasterboard: photo and installation process

Installation of plasterboard ceiling for the bedroom, the photo of which does not disappoint your friends, must be made correctly. To do this, you must clearly observe the distance between the ceiling profiles. It should be exactly 50 cm. Since the length of the sheets is 250 cm, the sheet falls on 6 profiles. The last sixth he closes only half. The second part will close the next sheet.

Ceilings for the bedroom of plasterboard: photo and installation process

Helpful advice! If an integer number of gypsum sheets does not fit into the room, then all of them should be fixed first. Then measure the remaining distances and cut the sheets on the floor, then finish the work.

Ceilings for the bedroom of plasterboard: photo and installation process

Fixing plasterboard sheets to the frame is carried out using self-tapping screws 25 mm long. On one sheet should go about 60 pieces. Screwing screws need to be very careful not to damage the sheet. At the same time, the caps should be slightly recessed.

Ceilings for the bedroom of plasterboard: photo and installation process

After all sheets are hemmed it is necessary to putty the joints and the attachment points of the screws. To do this, you can use any putty mixtures or ready-made putty. As a tool, we use a narrow spatula.

Ceilings for the bedroom of plasterboard: photo and installation process

Lighting in the bedroom should be special. It must be adjustable in brightness. To do this, you can use the main chandelier or lamp and independent point sources of light. The chandelier is fixed to the ceiling in the usual way, but to install point-mounted luminaires it is necessary to drill out the required number of holes with a mill to tighten the wires. After finishing the finishing, you need to insert the lamps themselves into these holes.

Ceilings for the bedroom of plasterboard: photo and installation process

Helpful advice! As a work item for spotlights, it is most advantageous to use LEDs. Though they are more expensive than incandescent bulbs, they are very bright and consume much less electricity.

Ceilings for the bedroom of plasterboard: photo and installation process

There are many ways to finish a plasterboard ceiling for a bedroom. Photos of some options may suggest interesting ideas. The most common options are wallpapering and painting with water-based paints. In addition, the suspended ceiling can be decorated with liquid wallpaper or put on it decorative plaster. Before any finish, it is recommended to apply several layers of primer to the sheets.

Ceilings for the bedroom of plasterboard: photo and installation process

Technology installation of multi-level ceilings is not too different from the above. However, it is much more difficult to build it and this requires some skills, since you first need to make a template. Installation of curved ceilings provides for the bending of drywall strips when covering the side surfaces. This can be done easily by slightly moistening the strips in water. Curved contour cut out with a knife or jigsaw.

A beautiful and functional ceiling in the bedroom can be made from such a simple material as drywall. It takes only a little patience and skill so that everything works out qualitatively, beautifully and reliably.

Like this post? Please share to your friends: