Modern pumping equipment of domestic production in performance almost does not yield to foreign counterparts. At the same time it allows you to significantly save money. For example, instead of an expensive foreign pump, you can use the Kid pump: technical characteristics, ease of connection and use of this type of equipment have gained wide popularity in the market.
Pump application
The use of the Malyshok pump is possible for solving a wide range of tasks; this equipment is used in garden plots, in subsidiary farms, on farm land and in summer cottages. Given the versatility of the pump, it can be used for the following purposes:
- arrangement of irrigation and irrigation systems in the garden area, irrigation of fields and irrigation of landings, in addition, equipment can be effectively used for pumping water from an artificial reservoir or, on the contrary, filling it;
- pumping water from a well or a well into a water supply system or special tanks; with the help of this pump it is possible to easily provide with water all the intake points in the summer cottage of a medium size;
- pumping water from basements and outbuildings in the event of flooding. The compact dimensions, ease of connection and operation of the equipment are excellent for this purpose.
Depending on the specifics of use, you can choose the option of the pump Kid with the lower water intake or with the upper one. The option with the lower fence is most effective when used in wells or wells with a diameter of more than 100 mm. Also, such equipment is well suited for pumping water from small tanks, that is useful when flooding rooms or pumping water from lowlands. Minus the lower fence – a high risk of dirt and various small particles, so it is recommended to install a filter at the inlet of the equipment with the lower fence.
The pump with the upper fence not only prevents debris from getting inside, but is also characterized by more efficient cooling and is practically not afraid of overheating. Such a pump can be safely left unattended, which allows it to be used to ensure the continuous operation of an autonomous water supply system. Also, this type of technology is used to lift water from wells and wells.
Helpful advice! When choosing a pump for the suburban area or gardening, pay attention to the purity of the water in which you will need to use the equipment. For polluted water bodies and tanks it is better to purchase a model with a top fence, in order to avoid the risk of accidental breakdowns.
Like any other vibration pump, the Kid works according to the inert principle – this means that there is a vibrator in its case, which gives the fluid an oscillating motion. The vibrator is an anchor to which the rod is attached. When the pump turns on in the network, the anchor is attracted to the magnet, then the magnet is turned off, and the special spring returns the anchor with the rod to its original position. Such fluctuations occur approximately 50 times per second.
According to the characteristics of the pump Kid, it is clear that such a simple design, nevertheless, can provide a sufficiently high fluid pressure in the water supply system.
At a relatively low price, the technical characteristics of the submersible pump Kid fully satisfy the needs of the modern user:
- working voltage – 220W;
- performance – 432 l / s;
- the presence of the upper and lower holes for water intake;
- working depth – up to 40 m;
- power – 245 watts.
The price of the water pump Kid varies from 1,000 to 2,000 rubles, while he has good performance characteristics that allowed him to gain confidence among users. In modern versions additionally installed built-in automatic protection system. Automation protects the pump from overheating as a result of dry running, and also allows the engine to quickly respond to power surges in the network. This is very important for suburban areas, which can not always boast a stable power supply.
Automatic water pump Kid turns off the power mechanism when the water level in the tank is low. The level is determined using a float system. When the water rises to a certain level, the pump motor starts again. The protection system operates from the same power source as the pump itself.
You should also understand that in the modern market of pumping equipment there are several modifications of this unit.
The peculiarity of this model is that it is designed to supply water over a long distance. Classic Kid effectively pumps water at 100-150 m, so it is often used for watering large suburban areas. The diameter of the hose for the pump Kid – 18-22 mm.
This model is not designed to work in a polluted environment, the permissible concentration of impurities should not exceed 0.01%. There are also requirements for the temperature of the pumped water – not higher than 35? С.
The basic model is not equipped with overheating protection, filter and pressure switch. And if the filter can still be installed on its own, then we will have to do without the other modifications. Of course, all this directly affects the price of the unit, because it is much lower than that of other models. The base model can dive a maximum of 5 m, and water is drawn through the bottom valve.
In terms of its technical characteristics, this model is practically no different from the classical one, except that water is drawn through the upper valve. Therefore, this modification of the pump for wells Baby is recommended to be used where the lower fence is impossible due to high contamination of the bottom.
Pumping station for a private house: water supply of a country site. Selection of equipment, specifications and installation. Advantages and disadvantages of systems. Overview of the best manufacturers.
It has the same characteristics as the base model, but boasts built-in protection against overheating. Such a model can be effectively used for long continuous work without supervision.
Submersible pump for the well Kid-3 is the most relevant for use in small wells. It is characterized by slightly more expensive than the base model, but at the same time it can boast significant structural differences:
- The pump itself and the electric motor are enclosed in a monolithic sealed unit, which completely eliminates the ingress of water.
- Rated power work is lower than the base model, and is only 165 watts. This is quite enough to work in a small well.
- The unit produces 0,432 m? / Hour at a pressure of 20 m.
- The weight of the device does not exceed 3 kg.
Also, the pump of this model has a compact size, and in the kit there is a cable protected from water. The water filter is not included in the basic package, but it can be easily purchased and installed on your own.
Helpful advice! When choosing a pump model Kid, consider the characteristics of the tank in which you plan to use it. Sometimes it is enough to purchase the simplest basic model, and sometimes it is better to immediately buy a version with built-in modifications.
It is logical that most of the pumping equipment is operated in difficult conditions. Because of this, the risk of breakdowns significantly increases, which can be reduced if one observes a number of elementary rules for operation and performs preventive repair work in time.
Most often, the equipment fails due to debris entering the mechanism. Also, over time, pipe clogging, erasing of parts, and the formation of silty deposits on the walls of the inlet and outlet can occur. The best method to combat pump clogging is to install special filters for the Kid pump. They hold solid particles and prevent them from penetrating the mechanism. The best option is the filter EFVP-St-38-125. It not only prevents particles up to 150 microns in size from penetrating into the pump mechanism, but is also very easy to install.
Helpful advice! You should not assume that the pump with the upper water intake filter is not needed for the pump. Debris in the mechanism can get not only from the bottom of the tank, but simply from the water, so installing the filter will be useful for any model.
Financial costs for the purchase and installation of the filter will be about 100 rubles. Such measures will significantly prolong the service life of the equipment and increase the efficiency of use, and you will be provided with clean water from any reservoir.
Before you begin to install pumping equipment, you should take into account the specifics of different models:
- When installing the pump for the well Kid, the equipment should be fixed not lower than 1 m from the bottom of the tank. This will minimize trash from the bottom into the mechanism.
- Equipment with a valve in the upper part can be installed on the bottom of the tank, since such a device eliminates the ingress of debris from the bottom.
In order to reduce the number of vibrations of the operating mechanism, you need to fasten one end of a strong nylon cord in a special hole on the pump casing, to the other end you need to attach a special elastic suspension, which can be a medical harness or an elastic rubber hose.
When working in a confined space, for example, in a well or a well, the pump may break against the walls of the tank, leading to premature failure. In order to avoid this, it is recommended to wear a wide ring of dense rubber on the body, which will act as a shock absorber in case of impact.
Remember that the equipment must be installed in a vertical position, horizontal installation can lead to premature breakdowns. The immersion depth of the unit must be greater than the lower dynamic water level indicator. Before the installation of the submersible pump for the well Kid, you should carry out the preparatory work, that is, determine the depth of the pump in the tank and purchase a hose of the appropriate diameter. It is very important that the diameter of the hose is suitable for the device, then it will be able to work as efficiently as possible.
The mismatch of the hose sections and the pump inlet may lead to overloads and premature wear of components. In no case can not connect the device to the mains during installation, it can be done only after all installation work is finished. If the electrical cable is too short, it can be lengthened, but the junction must be outside the well.
The need to repair the pump The baby most often arises from the fact that small debris gets into the mechanism from the water and silty deposits are formed. Therefore, to extend the life of the equipment, it must be regularly disassembled and cleaned. Video pump repair Kid do it yourself can be easily found on the Internet. It clearly demonstrates that the repair is carried out in the following sequence:
- Before you begin to disassemble the pump for water to give Baby, you should make notches on the body, which will mark the relative position of the parts. This will facilitate the assembly after the repair;
- then, in turn, loosen each of the screws that connect the body parts to each other. When assembling, conventional screws can be replaced with bolts with perpendicular cuts or with allen screws. In order to loosen the screws it was easier, the case can be compressed with a vice in the places of the ledges under the screws;
- after removing the case of the submersible vibration pump Kid, you need to install a piston disk – this is a very important point, since the installation should be carried out strictly parallel to the seat.
Useful advice! To accurately control the parallelism of the installation of the piston disc – use a caliper.
When the pump is disassembled, you can start cleaning and repairing it. In addition to blockages, one of the common causes of unit breakdowns can be the detachment of the epoxy compound as a result of expansion of the housing due to temperature drops. To repair the water pump Kid do it yourself with such a breakdown is quite simple. To begin with, a body should be tapped with a small hammer in order to determine the places of detachment of the compound. Where he went, the sound will be thinner. Then you need to remove the node with the compound, and with the help of the grinder applied to the body notches. The same notches in the form of a grid must be applied to the knot.
Then a sealant is applied to the knot and to the inner surface of the case; glue for glass or other similar composition is best suited. The assembly with the applied sealant is inserted into the case; a force of about 300 kg is applied to it. After the sealant hardens, the pump must be reassembled in the reverse order.
The composition of the pump repair kit Kid may include sealant, but sometimes it is safer to use additional tools.
One of the important points when assembling the pump is the coincidence of the holes, which are located in the central and upper part of the rubber gasket of the device. These nodes are symmetrical, so their mutual arrangement can be confused. The performance of the device can be easily checked by dropping it in a bucket of water. The height of the water jet from the outlet without a hose should be about 30 cm.
One of the most common problems with the operation of this device is that it works, but does not pump water. There may be several reasons for this:
- Loosening the lock nut in the pump device Kid. If the nut on the adjusting screw, which is located at the water intake, is weakened, then it is sufficient to simply tighten it, thus adjusting the efficiency of the unit.
- Failure of the rocking rod. One of the most serious malfunctions, since the stock is located in the adjacent node and it is very difficult to replace it without specialized equipment. To fix such a breakdown, you can either in a specialized service center, or having at your disposal a second broken pump with a different type of fault. In the second case, it is enough for you to remove a serviceable unit from the donor pump and install it on the original device.
- Breakdown rocking cuff. To detect this type of fault, you need to completely disassemble the unit. The swinging cuff looks like two small saucers that are arranged at the bottom of each other. This spare part is quite inexpensive and is easily replaced on its own.
If the water pressure switch for the Kid or other complex equipment fails, it is best not to risk it and seek qualified help. Despite the simplicity of the device unit, improper repair can lead to complete failure of all parts.
One of the reasons for the popularity of this type of equipment is that from it you can create a full-fledged pumping station, which can be included in the automatic water supply system. To do this, you only need to supplement the design of the pump pressure switch, a check valve and a hydraulic accumulator. Using the relay, you can maintain the required level of liquid in the tank, as it automatically turns the pump on or off as the water level rises or falls, respectively.
With a sufficient pump diameter, the Kid can be given a good water pressure, which is suitable not only for watering the backyard plot, but also for creating an autonomous water supply system in a small country house. This allows not only greatly simplify the organization of water supply, but also significantly reduce costs. The unit itself costs about 1-3 thousand rubles, and the installation of the relay and other additional equipment will cost you another thousand. It is much cheaper than installing an autonomous water supply system based on a centralized pipeline.
Helpful advice! If you want to use the pump to create a full-fledged pumping station, then it is best to purchase a model with all the additional features, that is, with automatic protection, a relay and a check valve.
If we talk about the pump Kid, user reviews on the Internet indicate that this unit is very popular not only in Russia but also abroad. Many users also confirm the high reliability of the device, ease of installation and operation, ease of maintenance and other positive qualities of the pump.
