Electric convector is a great alternative to create a warm and comfortable atmosphere in the house. Buying a convector would be appropriate if you need to heat a private house, or your apartment has problems with heating. There are a large number of varieties, manufacturers and models, but the best and most popular option is considered to be wall-mounted electric heating convectors. They have a lot of advantages, which we will discuss below.
Difference of the convector from a radiator
First, do not confuse the convector with a radiator. Inexperienced users often make mistakes in terms and take one device after another. A radiator is a heating device that heats the environment due to the fact that it heats itself. A wall-mounted convector with a thermostat passes air through itself, heats it and thus heats the space.
The main advantage of the wall-mounted convector over the radiator is the ease of installation and a small amount of occupied space. The device is installed on the wall in any convenient place, so there is no danger of stumbling about it, no need to lay cables and pipes, no need to bring coolant.
Among other features of cost-effective wall-mounted electric convectors for the dacha and apartment heating are the following:
- The convector is very easy to do it yourself. If we are talking about a wall installation, then you just need to drill a few holes in the wall, and the floor that follows from the name, just put on the floor.
- The efficiency of the convector is close to 100%, that is, all the electricity goes to heat the air.
- The equipment does not need maintenance, unlike many other heating systems.
- The convector is an environmentally friendly heater. When heating the room does not occur any emissions into the atmosphere, there is no air combustion.
- The average service life of the device is up to 20 years, and this is a very solid period.
- The heater works completely silently, as there is no circulation pump, fan and other elements that can create noise.
- The price of an electric wall-mounted convector with a thermostat is not much higher than a radiator with a similar power output, but it has much more advantages.
Helpful advice! If you choose a convector for a house in which there is a small child, then pay attention that the wall model does not turn over, has no sharp corners and does not heat in the area of the body.
The lack of an electric convector is only one – the high cost of electricity. Fortunately, many modern models have a so-called “economical” mode of operation, but it does not always save. Another small minus is the uneven temperature in the room when using a convector. According to the laws of physics, warm air accumulates at the top, and cold – at the bottom, and with high ceilings, this can be a very significant nuance.
According to the installation method, there are three main types of heaters of the convector principle of operation:
- Floor convector – convenient because it can always be installed closer to the power source, and if desired, the floor unit can be easily transferred to another room or moved to another corner. The disadvantage follows from the dignity – such a convector is easier to knock over or trip over it. This is especially inconvenient if you have small children or pets in the house.
- Wall option – mounted on the wall. The most popular place to install is the wall under the window. Thus, the cold air from the window opening is immediately heated, preventing the occurrence of drafts. In addition, with such an arrangement of the convector window will not mist over because of the thermal curtain.
- Built-in floor convector. The main advantage of this design option is its invisibility. It is mounted under the floor covering and is covered with a grid on top. Minus – to install such a convector is possible only in the process of repairing the floor, otherwise you will have to completely remove the coating.
Below we consider the device, the advantages and features of wall mounted convectors, as they are the most popular.
Convectors of heating electric wall-mounted thermostat is always equipped with a metal casing, inside of which there are heating elements. Their work is regulated by a thermostat, which can be electronic or mechanical.
The heat element of the convector is a ceramic structure, inside which there is a conductor with high resistance. It is sealed in a metal case and can have the following forms:
- radiator with plates for heat dissipation;
- with wings;
- with inserts for better aerodynamics.
With this design of the heating element and the shape of the convector can work with a temperature of from 600 to 1000 degrees Celsius. The advantage of this is that the air is not too dry, so you do not need to additionally purchase a humidifier.
Which radiator is better to choose for an apartment and a private house. Which radiators are better to use in an apartment with central heating, and which in a private house. Characteristics, advice on choosing.
The work of the convector is a commonplace physics. The cold air descends, passes through the heating element, becomes warmer and lighter, rises up. When warm air masses cool down, they descend again, and the process repeats.
Helpful advice! Regardless of which electric convector is better to acquire, it should always be installed as close to the floor as possible, but not flush. Thus, the maximum amount of cold air will pass through the heater.
All types of convectors can boast the following advantages:
- during the operation of the device there are no drafts, and the heating rate of the room is very high;
- the convector switched on in automatic mode does not need to be watched, all functions are regulated by the system;
- in any type of unit there is an automatic protection against overheating, so that the heating elements will not fail due to the high temperature;
- The built-in thermostat automatically turns off the convector when the desired air temperature in the room is reached, this allows you to significantly save electricity;
- high humidity is not a problem for most convectors, as they have moisture protection;
- the device has an ergonomic and safe design, it has no sharp corners, it can be safely put in the children’s room;
- only the heating element is heated, but not the body, so it is impossible to burn the convector;
- during the operation of the heater there is no unpleasant smell, the air is not burned and does not dry out;
- ventilation takes place in a natural way, so the unit operates completely silently.
Often the question arises: how to install the wall mounted electric heater with thermostat? Reviews indicate that the device is very easy to mount with your own hands. As a rule, the kit contains all the necessary parts, i.e. mounts for wall mounting or removable rollers to install the convector on the floor.
The required power of the convector is quite simple to pick up, for this you need to remember that for heating 20 square meters of a standard apartment or house you will need approximately 2000 W of power of the convector.
Helpful advice! If the ceilings in the room are higher than two and a half meters, then the power should be increased approximately twice.
Before buying, one of the most frequently asked questions is the type of thermostat. It can be mechanical or electronic. A unit with a mechanical thermostat will cost you less money, but it will have quite a few minuses. For example, a convector with a mechanical thermostat does not differ in accuracy when setting the temperature mode, and also cannot react as quickly to a decrease in temperature in the room as an electronic one. This means that you should not always expect a comfortable temperature.
If you are planning to buy a wall-mounted electric heating convector with an electronic type thermostat, consider that it will cost about 30% more than a mechanical one. However, when a cold snap in the room such a heater instantly reacts and begins to heat the air. The accuracy of temperature setting is much higher. In addition, there are thermostats with programmable heating mode, where you can set the hourly temperature. This is very convenient if, for example, you go to bed and do not want to wake up in a cool room.
Modern electric convectors are not limited to simply heating the air. Many of them have additional features that make the atmosphere in the house even more comfortable:
- anti-freezing function – the convector automatically turns on when the air temperature in the room drops below 5 degrees Celsius;
- various modes of operation – many heaters work not only in the basic mode, but also with the settings of “comfort”, “economy”, etc .;
- Air ionization is a very useful feature that can work even with the heating element turned off;
- rollover sensor – automatically turns off the convector if it falls. A useful feature if the house has animals or small children;
- automatic memorization of parameters – when turned off, the electronics remembers the settings that were set and returns to them after switching on;
- programmable heating element – with its help you can set such fine-tuning as the hourly temperature change, the temperature at night or day and even on a certain day of the week;
- universal control module – allows you to simultaneously configure multiple convectors located in different rooms from one console. A great option for a big house.
A convector is an electrical appliance, which means that using it means following certain safety precautions. There are a number of recommendations that should be followed if you have a convector in your home:
- Do not install or install the heater directly near the outlet; the minimum allowable distance is 0.8 m. This is done in order to avoid the possibility of a short circuit;
- convector is forbidden to cover. It is not recommended to dry the laundry, throwing it on the device, this can lead not only to the failure of the heating element, but also to the occurrence of a fire;
- If it is planned to install the unit in a room with a high level of humidity, then it should have adequate protection. The fact that the convector is protected from moisture is indicated by the marking “IP 24”;
- following these simple rules will not only ensure long and uninterrupted operation of equipment, but also your safety. After all, most fires happen precisely because of a violation of safety regulations for the use of electrical appliances.
If you need reliable and high-quality electric heating convectors, customer reviews are advised to pay attention to the products of the company DeLong. Their main advantage is the affordable price, but the quality is high.
Another option for a simple and affordable convector is Noirot. Many users characterize them as easy to manage and reliable.
Remember that wall-mounted electric heating convectors are a very sensitive technique that reacts poorly to a violation of operating rules. When used properly, the convector will provide a comfortable and cozy atmosphere in the house or in the apartment.